Tuesday, April 16, 2019

How to tell if your diamond is broken

The precious stones we buy are of great importance in our lives. If you did some research before buying diamonds, you may have read the items that people have done to protect diamond jewelry from debris, cracks, cracks, etc., but despite all the protective measures, your diamonds do Broken, or seems to have broken.

In this case, you are most likely looking for ways to determine if your gems are really cracked and what you can do to fix it. Like most people, when you accidentally rub your hand on the wall, you will almost certainly be a little scared. Over time, you will look for marks or cracks like most of us.

Let me assure you that it is reliable to tell the gem that it is severely damaged in this insult. The flaws you may see may not have any resemblance to cracks. Here, we will try to answer some common questions about broken diamonds. I will also show how a damaged gem actually appears to put all irrational concerns at rest.

Daily deterioration: rest is not possible, and cockroaches are common

After buying their first gemstone ring part and wearing it for a few weeks, many people became paranoid and began to worry if they had destroyed their diamonds. Have you had a similar experience? Most of the things I learned from my relationship with the audience and other customers just started to realize the details they had never seen before, because they now have time to scrutinize their jewelry. In fact, almost none of us have in-depth inspections of jewelry when actually deciding to buy jewelry, which makes me confused.

That's why we often end up finding the initial faults at the time of purchase. Of course, when you see something casual, you are more likely to notice the details. These problems only occur after they have watched the jewelry for a long time. In addition, they began to notice the presence of belt reflections or feather inclusions. Don't think it's too late to understand these questions now?

Having said that, it is often just a cleaning issue. When people see white lines as they pass through the stone, people often damage the diamond. Not the actual crack. This is because of the inevitable problem of having a dirty diamond. In fact, in your day, the gemstone diamond ring worn on the palm will inevitably come into contact with many things including soap, water, fingertips, dirt and actual mud. Initially, this dirt coating can cause surface imperfections that appear to cover clouds or greasy stains. Over time, some of these dirt will become so thick that it actually looks like a pure white line. If you see this dirt or dirt on any stone, you will definitely mistake it for the actual crack or flaw.

"Repair Split" - Clean Diamonds

In addition, as the diamond surface becomes more dirty, natural stone will begin to look boring and lifeless. Later, it is now easy to observe some inclusions that are covered by the brilliance and flash of the stone. This may lead you to believe that new defects have been formed, but in fact they always exist. By cleaning the diamonds and removing a lot of debris, you can easily restore the natural stone to its original state. Normally, a soft toothbrush plus some detergent solution is enough to do the job. If the side of your engagement ring happens to be difficult to access with a brush, you might consider using an ultrasonic cleaning device or bring it back to the jeweler for professional steam cleaning.

You get the price you pay: how could it really be broken?

In fact, the gems are a bit hard to break. In order to be able to actually create cracks in natural stone, you must use the right amount of energy in the correct position of the cleavage line to see the result. The ability of the crack represents a direct relationship between the quality of the gemstone and its own "fragility." Low quality grade diamonds and unhealthy cut grades [too shallow crowns or incredibly slim waistband widths] may be more susceptible to damage when passing through external forces.

From the perspective of the crystallization frame, over-mixed diamond jewellery has weaker material integrity due to problems and foreign objects. That's why you always want to check the diamonds carefully before buying. In general, the word "you get the price you pay" applies to the gem industry. By paying more for quality, you indirectly buy yourself for years of ruggedness and satisfaction. That's why many diamond experts recommend buying from refurbished diamond retailers and professional dealers.

This is where you buy from reputable sources. As we all know, good brands have been selling unpredictable diamonds for many years, and the quality has not compromised. Choose to buy gems carefully. These beautiful gems can last forever. Choose to make them last!




Orignal From: How to tell if your diamond is broken

No comments:

Post a Comment