Like any other piece of furniture, Indian wooden furniture is vulnerable to damage. Often, wooden furniture often suffers from perforations, cracks, minor cracks and broken or broken parts. Many times, porous wood like maple will crack and dry. However, Maple is not commonly used in making Indian furniture. In southern India, the climate is tropical and humid, and wooden furniture is easily deformed. In addition, cosmetics can damage Indian furniture. These include the peeling of the paint and the melting of the varnish. It is not impossible to repair damaged Indian wooden furniture and restore it to good condition. It only takes a little care.
Before the actual repair process begins, the furniture is transported to a dry outdoor area if weather permits. If you find that the furniture is too large to move outside, open all windows to ensure ventilation. Place some old newspapers on the floor to prevent wood chips and chemicals from leaking. Wear disposable rubber gloves and a safety mask before starting work.
To begin repairing damaged Indian wooden furniture, use any available chemical stripper to remove old varnish or paint. Take a clean brush, dipped it in the stripper, and apply the potion to Indian wooden furniture. Wait at least seven minutes for the agent to oxidize. Then, use a putty knife or scraping tool to start scraping off the top layer of the paint or varnish.
Now wear a pair of new gloves to protect your hands from debris. First, use an electric sanding device to wipe the surface of the Indian furniture, evenly flatten it and bring out the texture. Finely wipe the remote parts of the furniture with sandpaper. After that, use a clean brush to remove all dust.
Re-bond any raised blocks with some wood glue. Now look at the furniture and check the joints carefully. Re-attach any loose table or chair legs. As usual, first wipe off the surface with sandpaper in the joint to remove the old glue residue. Then, glue the inner surface of the joint and reattach the legs. Use the clip to secure the part in place. After the glue has dried, remove the clip only after six to eight hours.
Apply a wood sealant to any hair cracks or cracks. Let the sealant dry. When the glue and sealant are dry, gently wipe the surface again. Then, wipe off the wood chips on the Indian furniture.
After finishing all of the above work, dye your Indian wooden furniture. You can use a water-based stain to treat wooden furniture in a damp or dry environment. If you want to apply furniture, you can also choose latex paint. A few coats are enough. Finally, apply some waterproof and insect-resistant gloss finish to the wood.
Orignal From: Repair damaged Indian wooden furniture
No comments:
Post a Comment