The bucket is unique and is a useful vehicle designed for specific applications to increase the safety of the job. Using a bucket truck for specific work is a simple and safe decision to call, after which the main concern is to understand how to best use the vehicle. A frequently overlooked safety detail is actually quite important for the correct positioning of this useful aerial forklift - it can make a distinction between job success and failure.
Job planning
Although the bucket truck is equipped with an articulated crane and a rotating bucket that can be turned in almost any direction to reach the correct position, vehicle placement for any job is critical. The main consideration in deciding how to position the bucket truck is to find the best and safest location based on the ground, crane type and access to the work area. By following OSHA's guidelines for the use and positioning of different types of work being performed, security will be maximized in most cases. Therefore, it is important to start analyzing the work environment to find the best work schedule.
Positioning and obstacles
According to OSHA, the best location for any aerial work vehicle is the truck. The crane base and bucket are located in front of the pole and work area to provide the best access. If there are obstacles on the road, or if the ground is uneven, damaged or soft, other measures should be taken for safety settings.
When dealing with the physical obstacles of ideal vehicle placement, it is important to find a good setup that provides instant access while maintaining awareness of the location of the primary and secondary firewires. The best option is not to manipulate the two sets of wires; however, in order to reach the area on the other side of the pole, it is sometimes necessary to proceed cautiously. In this case, the position of the bucket should be such that the base is behind the rod; then the boom can be carefully guided above or below the auxiliary line to reach any set that must be accessed.
Ground problem
The best surface for a bucket truck is always concrete or pavement, which is clean, flat and in good condition. If it is not feasible, it should be adjusted. Attention must be paid to rainwater drains, curbs or parking spaces on top of broken asphalt, as these materials may rupture and/or collapse under the weight of the truck. On soft ground, it is recommended to use a steel slide to prevent the vehicle from getting stuck.
It is important to remember that when placed on such a surface, once the bucket is raised, the balance of the vehicle changes; therefore, the parking space must remain stable and unaffected by weight gain. On a sloping ground, the vehicle should be parked on a slope with the slanting bar in front of the crane base. In this way, the shifting weight of the raised crane is tilted over the largest part of the vehicle, which maintains all balance. The opposite positioning can allow the vehicle to flip backwards.
Regardless of the location of the truck, OSHA insists on following one detail - using the legs of the vehicle. Properly extended to prevent leaving the most vulnerable side, the legs are an important part of good positioning and prevention of flipping.
These tips sound simple; however, it's important to understand how to manipulate the bucket truck and properly position any obstacles or hazards. By spending extra time checking and re-checking the position of the bucket truck, a safe working area can be achieved and the risk of accidents is greatly reduced!
Orignal From: What is the best way to position a truck?
No comments:
Post a Comment