When you're just starting out as an up-and-coming DJ and are putting together the music and equipment you need, you might think you need to put the DJ speakers on the stand. So you want to know if the DIY speaker stand is a good idea, or if you should buy a DJ speaker stand.
In order to make this decision, no matter where the audio is built, it is easier to revisit the basic requirements of some useful DJ audio brackets. The requirement is - the audio stand should help the speaker to project sound through the space, the audio stand should prevent sound distortion and loss, and the DJ speaker stand should be sturdy and portable. Also, if you can get cheap audio and meet all the standards, why DIY?
These are the requirements for building high quality audio mounts that are fully functional and you can be proud of it:
The speaker stand should help the speaker project and transmit sound
This is the first and most important requirement. Sound projection depends on two factors: sound absorption and a clear sound path. In order to keep the sound unobstructed, the speaker audio stand must help to project the sound onto the audience. At the same time, the sound should not directly enter the audience to reduce the absorption of sound.
Most importantly, the DJ bracket needs to be height-adjustable, with the best height at the ear level or slightly higher. Depending on the venue and whether the audience is sitting, standing or both, you need to have your grandstand adjustable between 4 and 6 and 6. height.
Audio stand should prevent sound distortion and loss
The best way to prevent sound distortion is to attach the bracket firmly and narrowly into the speaker. Most DJ speakers have standard 1 3/8" sockets and some have 1 1/2" sockets. Be sure to tighten the screws to prevent any clicks or other sounds from being distorted. Minimize sound loss by using the smallest possible connection between the speaker and speaker sound. Therefore, if your speaker weight allows, use the smallest possible standard outlet size.
DJ audio stand should be sturdy and portable
This is where the materials used play an important role in building DJ audio mounts or PA speaker mounts. If you think you can build with a wooden speaker stand, think again. With wood, you will never be able to achieve the low weight of aluminum or steel speaker brackets - high impact resistance. But whether it's aluminum or stainless steel, you can create a sturdy, lightweight stand that can be easily transported in a car or van.
The most important thing is that you are a convenient person, your own position? Can you create a DIY DJ frame with all of the above features, sound projection, reduced sound distortion and loss, robustness and portability? If so, continue to build your own DJ stand. If not, please purchase a new DJ speaker stand.
Orignal From: DJ newbie - you should DIY speaker stand or buy a new DJ speaker stand
No comments:
Post a Comment