Tiles are known for adding the beauty of any home. However, these are expensive and require extra attention during installation or cleaning to ensure that everything is done in the right way.
In terms of cleaning, experts often recommend hiring professional cleaners, but many homeowners choose to do the job themselves.
Just follow some tips even if you can keep the tiles clean and spotless. However, before you start cleaning, you must understand the different types of tiles, which are:
- Light
- Texture
- undone
Keep in mind that all these types require different methods and considerations when performing cleaning.
- Tile cleaning frequency
These types of tiles should be cleaned daily, cleaned or vacuumed and wiped. This will prevent the development of the soil and ultimately require a stronger cleaning solution, which can damage the tile surface. Make sure to sweep across the floor to remove dirt and dust. After considering the type of tile, these strategies are used to wipe the floor.
- Unfinished tiles
Use a wet wipe to wet the floor with a mild solution. Slightly dipped into an area and apply water with a mop to release the soil. Wipe dry and use it to drain the soil and the remaining solution. When the entire floor is being cleaned, rinse with water to remove the solution deposits and any temporary soil.
- Polished tile
You need to apply the same method as an unfinished tile, but use almost half of the cleaning solution or chemicals compared to the unfinished tile. After washing the tiles, dry the wipes and dry the floor to avoid water spots.
- Texture tile
In this type of tile, you first need to follow the same cleaning method and then perform more steps. Use the solution to clean the floor according to the manufacturer's recommendations. After wetting with hot water, use a powerful broom to loosen the dirt particles on the textured surface. Wash properly to drain detergent buildup and residual dirt. If you think this is too much for you, just hire a tile-cleaning professional to do the best job for you!
- Things to consider
- Remember that the bathroom tiles, showers can collect soap or shampoo residues and water stains.
- Use delicate abrasive materials such as baking soda to remove soap residue and water stains. Wash properly and dry quickly to avoid water spots.
- If there is any spillage or dry mud on the floor, some scrubbing may be required with the help of a scrubber or a mild brush.
Orignal From: Tips and advice for cleaning tiles
No comments:
Post a Comment